current location current location： Home >  News >  News
go backgo back
caseXqBoxCenterLmenu

Instructions for using the deburring and chamfering knife for inner holes

big centre small
2023.06.25
Reading: 111 reader

1. The tool needs to be aligned with the center of the hole, otherwise it is easy to damage or break when cutting.

2. When reverse deburring, make sure that the edge of the deburring tool passes through the hole completely and is open. When lifting the tool, do not lift it too quickly (follow the recommended feed rate or adjust the feed rate by yourself, and do not lift it up instantly like a drill bit. Give the tool enough time to close), otherwise it is easy to break.

3. It is recommended to have a speed of around 800-1000 revolutions per minute and a feed rate of 200-250mm/min. If you feel that the chamfer is small, you can reduce the feed appropriately. If you feel that the chamfer is large, you can increase the feed appropriately.

4. In the use of chamfering and deburring tools, there are many ways to solve the problem of chamfering and deburring. This explanation is only a rough description. If you have any problems during use, please feel free to communicate with us at any time to better solve the problem of chamfering and deburring inner holes.


  • ←Types and advantages of thread correction tools
  • Precautions for selecting positive and negative deburring and chamfering knives→

    Recommended news more +

    top

    top

    Busisness Busisness
    Nut tap Extrusion tap Tip tap Straight groove tap
    Fast link Fast link
    About us About us
    Company Profile corporate culture Honor and Qualification Enterprise album
    News center News center
    Company News News Frequently asked question
    Follow us

    Follow us

    WhatAPP

    Copyright © Shanghai Lanke Thread Tools Co., Ltd copyright   sitemap RSS XML